It should extend two ceilings further than your pillar (not counting the first ceiling which is attached to the pillar) and should be placed three ceilings below the main platform. This should be the maximum range of ceilings. Build three ceilings down on the pillar and three ceilings out and build a pillar at the last ceiling all the way to the ground.well, gosh, that's what this is designed for! You'll have to make your starting point larger using ceilings and pillars until you can build out far enough. If the ground does not slope steeply enough, you can't fit support underneath it. Is your cliff initially very steep or is it gradual? Can you build three pillars down and fit three ceilings on the pillar (the third ceiling being the important one)? If constructing a wider ramp you only need to be able to do this on one side of the ramp at any point (either side, doesn't matter). Mind the gap, but really it only effects aesthetics All other methods are time consuming and use more materials and a great deal of trial and error. The pillars need something to snap to and this is the most reliable way to do so. Ceilings must be placed first in the initial step because they will be placed first to ensure proper pillar placement later on. Yes, placing the pillar first and then the ceiling DOES make it look prettier but it also alters the height of the ceiling which WILL NOT DO. If you cannot place enough foundations for the width of the ramp you desire, attach ceilings to the initial foundation and place pillars underneath them (pillars must reach all the way to the ground to count as foundation).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |